How to Paint Textured Walls

If you’ve ever painted textured walls, you know how difficult it can be to paint over them without getting the brush or roller caught up in all of the crevices of the texture. This is why it’s so important to ensure that your entire surface is properly prepared before painting any textured walls. Many different textures can be created on walls, so it’s important to be aware of the prep work required for each type.

You have two options when texturing a wall: use a drywall texture or a true texture. A drywall texture is done with a simple paint roller and a pan of the joint compound, while true textures imitate real-life textures, such as marble or stucco.

To prep a wall for painting textured walls in this manner will require the following steps:

Materials You Need to Paint a Textured Wall

  • Spackle
  • Putty Knife
  • Flat sheen paint
  • Leftover paint from the previous wall color
  • Angled paint brushes (good quality)
  • 6-inch paint rollers
  • Thick nap paint roller
  • painters tape
  • Edging tool and pad
  • Disposable liners
  • Drop cloth

Fill Holes and Scratches

All textured walls have imperfections that can’t be seen. You want to make sure that your wall doesn’t have any bare patches of paint and looks uneven. The first thing you must do before painting any textured walls is check for holes or scratches and fill them with a drywall patching compound. Be sure to allow the compound to dry completely and sand it smooth before moving on to the next step. Read our article on How to Patch Repair a Drywall to know more on this.

Clean Walls

Remove all debris from the walls with a vacuum and wipe with a damp cloth before you begin. This will help ensure that your texture remains even and smooth to the touch when you’re finished. Once you’ve cleaned the walls, remove all doors and cover any furniture with a drop cloth.

If there are any loose pieces of drywall or paint, they can be pulled off by hand or with tweezers to avoid marring your textured walls because that would make your wall look bad!

Tape Off Walls And Baseboards

Once the wall is completely dry, you’ll want to tape off all of the walls along with the trim and where the two walls meet. This will help keep your paint lines straight and prevent any excess texture compound splattering. These lines must be clean because even a small bump can ruin your texture and your entire wall.

Make sure to line up the tape perfectly so the angles are correct and there is no gap between the walls and baseboards. If you do not, there will be a “halo” effect on the textured wall when paint leaks under the tape during painting. You can avoid this by applying tape properly and taking your time.

Take Care of Outlet and Switch Covers

Before starting painting, make sure you have removed all switch outlets and covers. Removing them is one of the most important steps when painting textured walls. All switches, outlets, and plates need to be removed because the texture compound will cover them up, making it challenging to paint them properly afterward.

This is also an excellent time to remove switch covers if you use oil-based primer or paint. Oil-based products can yellow plastic covers and make them look terrible, so you must remove all the outlets and switch plates before painting textured walls.

Use the Right Painting Tools

It would help if you used the right tools before painting a textured wall. Depending on the texture you are trying to create, this includes a paint pan, roller, texture gun with filters and needles, drywall knife, foam rollers, or brushes.

No matter what type of texture compound you use for textured walls, it’s best to apply it in small sections at a time. An excellent way to avoid problems is to apply it to no more than six square feet at a time. Be sure to fill the entire wall evenly before moving on to the next section.

Also See: How to paint a Deck

Taper Angle Stroke

Make sure that your paint roller has an angled tip to help you smooth out any imperfections in your textured walls. You will want to start in the top left corner and move down and across diagonally to the right and bottom corners.

Hold the roller so that the tip is against the wall with your thumb on top of it, then lift slightly while pulling towards you. This will ensure very little paint on the wall when you begin painting textured walls.

When painting the corners, make sure to paint up and over like you were painting a ceiling. This will help create a seamless transition from high corner to low corner along the whole wall.

Don’t Forget the Trim!

It can be easy to forget about them when painting textured walls, but don’t forget that you need to paint the trim too! You need to tape it off like the walls and make sure that it gets painted.

You might want to consider painting your textured wall in sections by breaking your large room into 6-foot square chunks, which can be taped off easily, then painting each section separately before moving on to the next one. This makes it easier to paint and reduces any mess on other parts of the wall.

Apply a Second Coat

Once your wall is dry, you are ready to apply the second coat of textured wall paint. Like before, follow the same procedure as a brand new wall.

When applying the second coat of paint to textured walls, you want to be as even as possible.

Your second coat should blend with your first, so if the first coat is very thick in some areas, it will be very noticeable when you apply the second one.

Make sure there are no gaps in coverage and that all of your textured walls are smooth, with no visible lines or texture showing through.

Clean Up

When the painting part is done, clean up and put away your supplies. Make sure you don’t leave any textured wall paint out to dry, or it will begin to harden and get difficult to remove.

You might also want to consider using a fresh paint roller cover before painting another wall if you plan on going straight from one paint project into the next one. This will prevent any leftover residue from textured wall paint from getting into your new coat of regular wall paint or primer.

After everything is clean and put away, sit back and relax because the hard part of painting textured walls is over! Now all you have to do is enjoy the new look you get with your textured wall paint.

Conclusion

Now that you know how to paint textured walls, the only thing left to do is get started! You never know how much you can change the look of your room with just a few coats of textured wall paint. Just remember to use the right tools, apply it in small sections at a time, and don’t forget the trim! Be sure to follow the tips we’ve provided to make the process as smooth as possible. If you make any mistakes, don’t fret! Just pick yourself up and try again.

Remember, practice makes perfect!

FAQ’s

What are textured walls?

Textured walls are any wall that has a pattern, texture, or bumpy appearance built into the paint. They’re often used today to give rooms a more modern look, but they were first made popular in the ’60s and ’70s with their retro style.

What kind of paint do you use on textured walls?

You can use paints that are latex or oil-based with a low-maintenance finish. This highlights the texture of the wall but also prevents moisture from building up on the wall.

What paint roller should you use for textured walls?

A taper angled paint roller is best to achieve a smooth blend with your existing wall color. This would cover all the spaces and dentures, which regular brushes would miss out on while painting the wall.

What do you do about the ceiling?

Depending on your skill level, you can do it yourself or call for professional help. If you’re trying to change the color, regular flat paint is good enough. There are no special textures to worry about here. However, if you have dentures or crevices painted with a brush and filler, it’s much faster and easier to do it yourself.

Also Read: Tips to Remove Popcorn Ceiling

How much paint will you need?

If you are using 5-gallon buckets of textured wall paint, then this will be sufficient to cover 400 square feet. The amount also depends on the wall’s texture and how many coats you will need to apply.

What do you use to tape the trim?

It would help if you used low-tack painter’s tape for any of your textured walls. This will ensure that it doesn’t cause any damage or leave behind any residue on the wall.

How long does textured wall paint take to dry?

The drying time will depend on the texture you are using and your climate, but it should only take a few hours. It’s best to wait overnight before walking on the surface or hanging anything else.

What is the best method for painting textured walls?

There are two methods to use when painting textured walls. The most common method includes putting masking tape in sections and then using an angled taper roller to paint the lines and follow them down to meet at the bottom. Many recommend using a paint sprayer, but it can be challenging to cover all surfaces with just one tool.

How do you apply textured wall paint?

You want to be as even as possible when applying textured wall paint. It’s best to start by filling in the bottom and work your way up. This will reduce any lines and make it look like a smooth transition from one wall to the next.

See Also: Types of Formal Living Room | How to Paint Concrete Flooring

Written by


Rostislav Shetman is the founder of 9Kilo Moving. He has been in the moving and relocation industry for more than 25 years, making him an expert in his field. Rostislav started as a helper, dispatcher and driver and has worked his way up to owning his own company. He takes great pride in his work and enjoys helping people relocate across the United States of America. When he's not working, Rostislav enjoys spending time with his family and friends. They are the light of his life and bring him happiness every day.